Moulded Die-Pressed Teflon PTFE Sheet For Seals Linings Diaphragm

With professional moulded die-pressed teflon ptfe sheet for seals linings diaphragm factory, KAXITE is one of the leading China Teflon Ptfe Sheet manufacturers and suppliers.

1.Virgin and recycled materials available
2.Size can be made based on customers' requirement.

PTFE molded sheet is manufactured by molding process with PTFE granular resin and sintering.It has excellent characteristics of a wide range of practicable temperature from -180c to +260c,chemical corrosion resistance,weathering resistance,dielectric superiority,high lubricity,anti-adhesive and innocuity.It is very suitable for seals,linings,diaphragm,scraper guide and bearing pad for bridge.

Specifications:

Moulded /Die-pressed Sheet sizes available:

1. Length×Width :150×150mm--2000×2000mm or as your requirements

2. Thickness : 3-100mm

3. Virgin and recycled materials available

4. Made of teflon molding power

5. Temperature : -180--260°c

6. Stretch strength : >15Mpa

7. Break elongation rate :200%

8. Packing: plastic film or bag (i nner packing ) ,wooden case ( outer packing )

9. Can be used to make corrosion-resistant liner, seal, lining and gasket, scrap, guide rail

10. With high quality and competitive price

Features:

1. anti-corrosion in all kinds of chemicals including nitric acid & aqua fortis;

2. good dielectric in mediums;

3. non-aging;

4. can be used in wide strength range, etc.

Use of skived PTFE films:

1. seal liner and lubricant material in kinds of medium, especially corrosive situation;

2. dielectric material in kinds of frequency;

3. medium materials of capacities;

4. insulation material in electrics systems, etc.